High Performance Computer and Electronics UPS for Premium Power Protection
Includes: CD with software, USB cable, User Manual
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that
require UPS battery back-up while providing surge only protection for
less critical equipment
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Green mode
Patent-pending operating mode that bypasses unused electrical components
in good power conditions to achieve very high operating efficiency
without sacrificing any protection.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the
connected service provider equipment and within the specified
environment.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades
and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Pro Features & Benefits
Manageability
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Disconnected battery notification
Warns when a battery is not available to provide backup power.
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Safety
Safety-agency approved
Ensures the product has been
tested and approved to work safely with the connected service provider
equipment and within the specified environment.
Availability
Customizable voltage sensitivity
Toggle between
pre-determined voltage-transfer points depending on your power quality
(high, medium or low sensitivity), maximizing useful battery life and
protecting sensitive electronics.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Green mode
Patent-pending operating
mode that bypasses unused electrical components in good power conditions
to achieve very high operating efficiency without sacrificing any
protection.
Customizable voltage-transfer points
Adjust the voltage points
(widen or tighten the range) where your UPS transfers to battery to
maximize useful battery life and protect sensitive electronics.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Energy Management Function
Energy saving feature
automatically power off peripherals when the a master device, usually a
PC, hibernates or is shut down. Power to peripherals is immediately
restored when the master device wakes up or is switched on.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application
availability by correcting low and high voltage conditions without using
the battery (not available on all models).
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Cold-start capable
Provides temporary battery power when the utility power is out.
Serviceability
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Surge only outlets
Protect secondary
electronics from surges and spikes without reducing battery power used
to run primary electronics during an outage.
Marketing Features
Green mode
Patent-pending operating
mode that bypasses unused electrical components in good power conditions
to achieve very high operating efficiency without sacrificing any
protection.
Energy Management Function
Energy saving feature
automatically power off peripherals when the a master device, usually a
PC, hibernates or is shut down. Power to peripherals is immediately
restored when the master device wakes up or is switched on.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery-protected and surge-only outlets
Reserves power capacity and
run time for connected equipment that require UPS battery back-up while
providing surge only protection for less critical equipment
Technical Specifications
Output
Output power capacity
330Watts
/ 550VA
Max Configurable Power (Watts)
330Watts
/ 550VA
Nominal Output Voltage
230V
Output Frequency (sync to mains)
50 Hz
Topology
Line Interactive
Waveform type
Stepped approximation to a sinewave
Output Connections
(3)
IEC 320 C13
(selector_surgetitle)
(3)
IEC 320 C13
(Battery Backup)
(2)
IEC Jumpers
(Battery Backup)
Transfer Time
6ms typical : 10ms maximum
Input
Nominal Input Voltage
230V
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC-320 C14
Input voltage range for main operations
176 - 282V
Input voltage adjustable range for mains operation
155 - 290V
Maximum Input Current
6.0A
Batteries & Runtime
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof